AgXRP Sensor Data

Presentation Mode: This website uses simulated AgXRP data for demo purposes only and does not control physical pumps, sensors, or robot hardware.
Modo de presentación: Este sitio usa datos simulados de AgXRP solo para demostración y no controla bombas, sensores ni hardware físico.
Temperature:No data
Humidity:No data
CO2 PPM:No data
Light Intensity:No data
Plant 1 (Blue)
Plant 2 (Green)

Plant 1

P1

Plant 1 moisture sensor, pump, and live state.

Plant 1 Moisture:No data
Raw Capacitance:No data
Calibration:No data
Pump Status:Stopped

Plant 2

P2

Plant 2 moisture sensor, pump, and live state.

Plant 2 Moisture:No data
Raw Capacitance:No data
Calibration:No data
Pump Status:Stopped

Soil Sensor Calibration

Enter the dry and wet calibration values in picofarads (pF). Dry pF is the raw reading when soil is completely dry. Wet pF is the raw reading when soil is fully saturated.

Soil Sensor 1

Soil Sensor 2

Manual Pump Control

Manually start or stop water pumps. Pumps will run until you click Stop.

Pump 1
Pump 2

Pump Calibration

Calibrate pumps to accurately dispense water volumes in milliliters. The calibration value is milliliters (mL) per pump revolution.

Pump 1

Current Calibration: Loading... mL/rev

Test Pump

Run the pump to measure water output for calibration.

Update Calibration

Directly set mL/rev if you know the value.
How to calibrate:
1. Run the pump for a known number of revolutions
2. Measure the water dispensed in milliliters
3. Calculate: mL per revolution = measured mL ÷ revolutions
4. Enter the calculated value above and click "Update Calibration"

Pump 2

Current Calibration: Loading... mL/rev

Test Pump

Run the pump to measure water output for calibration.

Update Calibration

Directly set mL/rev if you know the value.
How to calibrate:
1. Run the pump for a known number of revolutions
2. Measure the water dispensed in milliliters
3. Calculate: mL per revolution = measured mL ÷ revolutions
4. Enter the calculated value above and click "Update Calibration"

Automatic Watering Controller

Configure automated watering based on soil moisture thresholds.

Plant System: Sensor 1 + Pump 1

Plant System: Sensor 2 + Pump 2

Data

Plant 1 (Blue)
Plant 2 (Green)

Plant 1

P1

Plant 1 moisture history, live indicators, and watering events.

Plant 1 Moisture:No data
Raw Capacitance:No data
Pump Status:Stopped

Insights

Plant 1 Watering Events

Timestamp Duration / Amount Moisture Action

Plant 2

P2

Plant 2 moisture history, live indicators, and watering events.

Plant 2 Moisture:No data
Raw Capacitance:No data
Pump Status:Stopped

Insights

Plant 2 Watering Events

Timestamp Duration / Amount Moisture Action

System Logs